Summary of explained features

Extrude Boss (Material Adding)

- Based on a contour (Closed Area).

- You can add more than one extrude out of one sketch contains more than      one contour.

Extrude Cut (Material Removing)

- Based on a contour (Closed Area).

- You can add more than one extrude cut out of one sketch contains more than one contour.

Revolve Boss (Material Adding)

-Adding material radially around a defined axis.

- Based on contour and a revolution axis (Could be centre line or solid line).

Revolve Cut (Material Removing)

-Cutting material radially around a defined axis.

- Based on a contour and a revolution axis (Could be centre line or solid line).

Sweep Boss (Material Adding)

- Adding material based on a cross section and a path.

- You need two separate sketches to define the cross section and the path.

Sweep Cut (Material Removing)

- Cutting material based on a cross section and a path.

- You need two separate sketches to define the cross section and the path.

Shell

- Needs an existing 3D part.

- Select a face to remove and shell the body

Hole Wizard

- Creating holes, Taps, Countersinks, ….etc.

- Needs an existing 3D part.

Fillet & Chamfer

- Creating fillets and chamfers

- Needs an existing 3D part.

The course explains more features in the exercises sections